Chemicals for aging wood at home

How to age wood at home : Chemicals For Aging Wood At Home

Quote from Article entitled How to age wood at home:

If the last method combined mechanical and chemical effect, then chemistry will be applied largely. If the door or other piece of furniture made of hardwoods, then you should know that it contains tannin, which has an ammonia impact. In such a case, the surface treated with ammonia, which will cause a noticeable wood darkening. It is quite simple to accomplish it at home, but previously you must process the surface with sandpaper, otherwise any remaining dirt will not get the desired look. This effect is similar to the previous method, since both the structure and the color will be the same as if the tree is very old. The hue will turn into grey. You can also use paint to give the wood an old look. The point is to make the imitation of faded paint. You need to do the following:

Pick up the tone of the main layer. It can be any way you like, but you should focus on what shade wooden doors were originally.Only after the base layer are dry you can move to white paint. When it’s partially dry up than you will need to carry out the grout surface. The main cover must be clearly viewed through the white layer. Interior doors made from wood also can be artificially aged by using cracking varnish, which helps to create the effect of cracks. A varnish applied firstly, then - paint. It will seem that the door was painted a long time, although it was a few days ago. The stain will be also a good material to age the wood. In some areas it remains, in some washed off. So, in the end the certain areas will be darker. After applying the stain, you should apply a layer of gasoline. Shellac put in the pores of the wooden material helps you finish the job, which is putting in the pores of the wood material.

The full version of the article can be found here.

Back to How to age wood at home