Silicone spray




The excellent digital imagery below, is section of How to lubricate entry doors and what to use post which is categorised within Front Doors, and posted at October 10th, 2016 12:54:46 PM by adminz.
Silicone spray
Share this!




How to lubricate entry doors and what to use : Silicone Spray

Quote from Article entitled How to lubricate entry doors and what to use:

The whole procedure of cleaning and oiling is rather simple. First of all, you should put a lot of cleaning substance into the lock barrel, insert a key in the lock, and then immediately remove it. Afterwards, wipe the key and repeat the procedure once again. Keep doing it, until the surface of the key stays clean. The process of oiling the locking-mechanism is just the same. You should open and close the lock a few times, so that the lubricant spreads and dispenses.

The full version of the article can be found here.

Back to How to lubricate entry doors and what to use




Photo Gallery of the How to lubricate entry doors and what to use

Lubricating A Sticky Door Lock & Key With Graphite PowderSynthetic gun oilPenetrating aerosolsLubricante aerosolsLubricate a Lock Using Graphite From a PencilGun oil aerosolLithium waterproof greaseLithium greaseGrease oilGrease lubricantUsing of engine oilLubricating a combination lock – WD-40 – aerosolsSilicone sprayGraphite LubricantGraphite powderLocks – What parts have to be oiledHow to lubricate the door lock with their handsHow to lubricate entry doors
Show Buttons
Hide Buttons
Go to the top of the page